 "mechanical engineer available"
Curriculum VitaeCareer Objective: To obtain a challenging position in the area of Steel fabrication, steel construction, steel welding, and steel erection: boilers, tanks, piping & steel structure. Name : Eng’r. Osama Mahmoud Abd- Elhamed Elbahrawy Date of birth: 06th June 1958 Nationality : Egyptian Contact Tel. in Egypt : 0020223632585 / 0020184592756 / 002022415433 Communication postal address: Heliopolis, Cairo, 12 Ismael Ramzy Street, Apartment No 11, Cairo, Egypt E-mail address: bahrawy_en@yahoo.com or osasahar@yahoo.com Education: 1 B.Sc. Degree in Mechanical Engineering – Power Section - in 1982 from Faculty of Engineering, Ain Shams University. 2 Level II NDT Ultrasonic inspection. 3 Level II NDT P.T 4 Level II NDT M.T 5 Level II NDT V.I • AutoCAD training course: from Cairo University. • Diploma in the specialty of “Heat Treatment” in the Academic year 1992/1993 from Tabbing Institute for Metallurgical Studies (TLMS). • Training course on “Welding technology, welding metallurgy and non-destructive testing” from “Central Metallurgical Research and Development Institute (CMRDI)”. • Training course held on “Entrance for Weldment Design” From the Egyptian Engineering Committee. • Training course held on “Welding Technology For Engineers from Industrial Design Development Center. WORK EXPERIENCE : FROM 1 APRIL2009 UNTILL 1/2/2010 Working with “LEAD CO.” under "SAIPEM" supervision as a technical office engineer in the UTBS “Southern unit for treating the crude oil in “HASSI MASSOUD" ALGEREA. My duties were : 1 Review documents/drawings submitted by the client 2 Preparing the layout for the project 3 Preparing the fabrication sequence for the project. 4 Supervising for the work shop drawings done by the draftsman 5 Distribute approved fabrication, W.S.D. to Yard , material control QA/QC FROM SEPT.2008 TO MARCH 2009: I was work as in west thermal power station (350 Mw) as construction supervisor engineer in Hitachi co , responsible for: 1) Coordinate with civil works on site 2) Checking the material supplied to the site 3) Supervise assembly and prefabrication steps on site 4) Coordinate with the consultant PEGASCO DURING JUNE 2007 UNTILL August 2008 Working with WINTERSHALL PETROLIUM COMPANY as “Technical office engineer”Jahkira” in Libya” Gas Oil Separation Plant (GOSP) and Gas Utility Plant (GUP), 6 Review documents/drawings submitted by the client 7 Preparing the layout for the project 8 Preparing the fabrication sequence for the project. 9 Supervising for the work shop drawings done by the draftsman 10 Distribute approved fabrication, W.S.D. to Yard , material control QA/QC 11 Preparing the reports and weekly submitted to the client 12 Attend to any site problems associated with project and suggest solutions/alternatives For the client’ approval 13 Issue site Queries, follow up, and close out 14 I am authorized person for the As-Built signing of all drawings after compilation of the project. During April 2006 to May 2007 Worked with SAFARI Co. Ltd. as “Technical office & site Engineer” in Restoration Piping project in King Abdul Aziz Naval Base in Jubail, Saudi Arabia. 1 Prepare drafts and shop drawing for piping plane and pipe supports 2 Prepared the welding procedure (W.P.S)) for Carbon Steel Pipes for the application of diesel line. 3 Prepared the performance qualification record (P.Q.R). 4 Training and qualify 4 (four) welders for 6G position and 1 welder for 1G position 5 Supervised the Welding and Radiographic testing for diesel line pipes 6 Supervised the fabrication for common support pipelines. 7 Supervised the fabrication for Hydraulic pipe line supports During March 2002 to March 2006 Worked as “technical office & fabrication Engineer”, with “INTERNATIONAL Co. for BOILERS & PRESSURE VESSELS IBSF” Responsibilities were: Preparation of route sheets, material estimation, and shop drawings for tanks, pressure vessels, and piping and steel structure. NOTE: Route sheet is a document indicates the steps of fabrication, and the inspection needed and the hold points, type of material used...Etc. During Nov. 1997- Sept. 2001 Worked as “Technical Office Engineer” with KOLALY ENGINEERING Co. in Egypt. Responsibilities were: 1997 To prepare the workshop drawing for Steel Structure Buildings; Towers, Bridges or pipe racks 1998 To prepare the cut sheets for tanks or vessels 1999 To estimate the material list upon which Purchasing order is released. 2000 To prepare Bolt list & Bolt plan, Bolt list should be sent to purchasing department. Bolt plan is sent to erection department 2001 To prepare Assembly list. Assembly list include: item main size, length, quantity & weight, Assembly list is sent to erection department ُ Examples for projects, which I participated in: Niigata project: it was 750 ton steel structure pipe bridges TOYO project: it was a factory for petrochemicals in Sues, in which I prepare the checkered plate platform, workshop drawing for stairs and ladders. “Quess” Newsprint paper factory project: I prepared the Workshop drawing for the main store building (300 ton) I make a complete revision for wet cleaning Building (250 ton steel structure). I make a complete design for the grating of the recovery Boiler, which was 480 ton steel structure & 40 meter height. The grating weight was about 60 ton. Also I prepared bolt list, bolt plan, assembly list & material list for many buildings in that factory. Workshop drawing of the steel structure of Mazout tank. Handrail & stairs workshop drawing for the Mechanical Bulb Building, Chemical bulb building & Recovery boiler building. During 1996-1997 Worked with “MITSUBISHI HEAVY INDUSTRIES Co.” as a Technical Supervisor, for tank erection for 200 * 5 Mega watts Thermal Electric Power station in Aleppo, Syria. My duties were: 2002 To check the material incoming of the tanks in the light of the packing list and drawing & to report to my chief about any missed items or incorrect material such as: check the shell course sheets; its thickness; its quantities; its dimension. 2003 Check the bottom plates & annular plates. 2004 Check the nozzles, flanges, manholes, bolts, roof steel structure, and all other items 2005 To supervise erection work such as: - Assembly of annular plates - Assembly of bottom plates - Assembly of shell plate - Welding sequences - Visual inspection for welding - Assembly of roof structure & Roof plate 2006 Witnessed in all inspection tests such as: - Air vacuum test for bottom plate welding - Oil leak test for shell plates welding - Roundness test inside the tank - Banding test inside the tank with a vertical sweep board. 2007 Plumpness test inside the tank 2008 Liquid penetrate test for annular plates welding 2009 Preparation for water filling test for the tanks. 1989-1995 Nasr Boiler Co. & Bab& Wilcox Co. 2010 The field of work is manufacturing and erection of: - Pressure Vessels - Fire tube boilers - Water tube boiler - Heat exchangers - Oil tanks 2011 As a Production control Engineer in the workshop I was responsible for the following activities: - Distribute the new revisions of engineering drawing on the different work centers and cancels the old revisions. - Arrange The Time Schedule( using the Primavera) - Material list & the Inspection Plan - Release material from stores & distribute tasks for different work centers: [cutting - edge preparation - rolling – lathing m /c’ s - Assembly & welding - I follow up all manufacturing stages - I coordinated with Quality Control Department with Guidance of the Inspection Plan - Before I request the Q.C I make pre- inspection (if possible) such as: - Dimension check - Nozzle opening marking - Check opening Dim - Check shell dimension - Check – assembly - Check-Welding visual inspection - From I work as a Teacher in Technical school 1987-1989 : Technical teacher in Industrial Technical School, I have had two diplomas in education in 1988 and 1989. I taught Engineering Drawings, and Mathematics. 1982 – 1986 : I served in the Egyptian Army as an Officer, In addition to my responsibilities in managing and Administration tasks. I was also responsible for technical leveling for technical military students Skills: - English speaking & writing. - Thorough read for engineering drawing - Intensive interest with details - Good communication & co-relation - Good follow-up Computer Skills: AutoCAD 2, 3 D Solid works. Primavera MS Word MS Excel MS Access MS Power Point 2 Societies: Member in Egyptian Engineering Syndicate 3 Interests: reading books, playing football | 
