'Aircraft maintenance jobs' Wanted

Aircraft maintenance jobs

William Brotherton (24.162.149.135) -

I am a Middle East experienced FAA A&P aircraft mechanic. I am seeking work in Iraq. I have 6 years experience in the region on Corporate and commecial aircraft. I am ready to go. Speak Arabic and know the ropes. If interested e-mail me at chip737@http://hotmail.com or phone me at 001-254-733-9323 or 001-254-732-2547

Chip

Reply #1 Mike Pierce (68.97.142.120) -

I am looking for employment as an Aviation Maintenance Technician. I am a FAA certified Airframe & Powerplant mechanic with experience in commercial aircraft maintenance.

I have a passport and will send resume upon request.

Reply #2 James Halpin Jr (216.96.33.208) -

I too am looking for employment as an Aviation Maintenance Techinician. I am FAA certified Power Plant Mechanic. I also have 10 years exeperience in the Electrical Engineering field.

I travel internationally now so I possess a pass port. I am seeking work in Iraq or Afghanistan

Please contact me at jhalpinjr@yahoo.com, phone 001-478-808-6186

Reply #3 Dexter Simmons (66.32.153.223) -

I'm a Aircraft Sheetmetal Mechanic seeking employment in Iraq with a major contractor ,I'm a have experience on many differnt military aircrafts ( C-5, F-15 ,Apache ,Blackhawks, Shinooks, C-130 ) and have a valid passports and my qwn told shadow etch and ready to go.

Reply #4 Ben-hariz karim (85.168.116.168) -

Iam looking for employment as an aviation maintenance i'have JAR66 B1/B2 Boeing 737/200/300/400/500 Airbus 319/320/321

CFM56 ENG V2500 ENG JT ENG

ERJ 135/145 AE3007 ENG

and many experience jembo jet B747/300/400 752/200 767/200/300

airframe powerplante avionic instruments speak englisch french native Arabic

Ben-hariz

Karim

0033148527025

0033672561071

5 bis rue chevreul 94600 choisy le roi France

French nationality

Email:bhk737@http://hotmail.com

Best Regards.

Reply #5 Kristian Krauss (195.14.222.232) -

Kristian Krauss

Bruesseler Platz 15, 50674 Koeln, Germany, (+49)162 2052015

kristiankrauss@gmail.com

Objective

A position as Electrician Tradesman, Aircraft Maintenance Technician, Avionics Technician, Simulator Technician

Employment

8/2005 – today free-lance Simulator Technician MD80, DC9

Sim-Zone Flight Simulation ltd., 65795 Hattersheim, Germany

Maintenance, troubleshooting and repair of simulator system malfunctions

Performed calibration of the CLS and Motion System

1/2002 - 12/2004 Simulator Technician Full-Flight Simulators C-160 Transall

CAE Electronic ltd. Company, Air Transport Squadron 62, Germany

Maintenance, troubleshooting and repair of simulator system malfunctions

Performed calibration of the CLS and Motion System

Operated necessary test equipment

6/1994 – 12/2000 Avionics System Technician - TORNADO

German Air Force Flying Training Center, HAFB, NM, USA

German Air Force Fighter Wing Squadron 31, Germany

Maintenance, troubleshooting and repair of Anti-Skid System, Nose-Wheel-Steering, Air Break System, Engine Control System, Throttle Box, and pit indicators according to Federal Armed Forces regulations

Operated necessary test equipment

Education

1/2001 - 07/2002 Federal Armed Forces Technical School,

Koeln, Germany

Graduated with secondary college degree

4/1996 – 9/1996 Federal Armed Forces Technical School

Kaufbeuren, Germany

Avionic System Technician

8/1995 – 11/1995 Federal Armed Forces Technical School

Kloster Lechfeld, Germany

Electronic / IT training

Awards

IFOR Medal (UNO / German Air Force)

Skills and Abillities

Used to work highly concentrated in stressful high risk situations

Able to work under time pressure

References Available upon request

Reply #6 abdallah shoman (216.236.208.42) -

hi iam from lebanon iam looking for maint ava job

i have 10 year exp in avionics A32x line&base maint

T/shooting system OPt

Reply #7 Jose Maria Barbosa Rodrigues (217.168.114.196) -

I am Looking for job as an Maintenance Enginner.

I have qualification on ATR 42/72, EMB 120, CASA 212/300, HS 748, B757-200, with Rolls Royce and Prat Whitney engines, A300 B2/B4. More than 20 years of experience.

Contact 00238 9810999. Fax Number 00238 2632200

Reply #8 gary crowe (195.92.168.165) -

looking for a position as a aircraft technician i have gained a national certificate in basic aircraft maintainance and flight controls. 1 year experinece on inspection dismantling and repair thrustreversers, inlet cowls, and flight controls and nacelles c.v. on request

Reply #9 Dennis M. Bozza (64.53.210.226) -

I will be getting my FAA A&P certificate in two weeks.My education has given me "hands-on" experience in turbine engines AC&DC electrical systems, hydraulis and pneumatic systems,Drafting and blue print reading just to name a few. I was wondering what types of jobs are available and how soon can I leave!!!!!!!!

Reply #10 Adalberto Cristaldo (200.61.236.206) -

I hold the FAA A&P Mechanic Licensen and I have 5 years experience working on B727/ B757 and B767 aircraft. However I left working on aircrafts for 10 years!! and I would like to re-enter this activity as soon as possible. I am ready to travel anywhere.

You may reach me at mail: multimarket_py@http://hotmail.com

Reply #11 mikeAnderson (146.18.173.73) -

17 years experience c-130,&15years convair/electra/ also 727/737 BAC111. casacn235..(34 years aircraft experience)lockheed jetstar. ciation l &ll. lookin work overseas.

Reply #12 MIKE (146.18.173.73) -

17 years experience c-130,&15years convair/electra/ also 727/737 BAC111. casacn235..(34 years aircraft experience)lockheed jetstar. ciation l &ll. lookin work overseas. CONTACT MIKEANDERSON7777@YAHOO.COM

Reply #13 John Gentry (69.165.137.96) -

Aircraft Mechanic with sheet metal, line , and heavy check expierence on both fixed wing and rotary wing type aircraft. DC-8, DC-9, 727, 737, A320, MH-53E. Licensed A/P with passport and clean background. Seeking lucrative 1 year contract worldwide / Iraq.

Reply #14 David H Pereira (201.51.24.5) -

Read my Resume below:

David H Pereira

Rua Itaocara, 523 ● Duque de Caxias - RJ – Brasil ● 55-21-36526437 ● davidhpereira@yahoo.com.br

July 29, 2006

Mrs.

Dear Mrs.

It is with great interest that I introduce myself as a candidate to be an electronic technician in your maintenance staff. With a strong acquaintance acquired during 33 years working as electronic technician (26 years by Varig Airlines, as flight simulator technician), I believe this qualification would be ideal to make a valuable and immediate contribution to your operations.

The following are highlights of my qualifications:

• Fixing Knowledge, by hands-on jobs, of the electronic theory, executing repairs in several components at printed boards after sistem drawings and circuit diagrams analyzings;

• Ability to design e execute the maintenance routines;

• Good Ability in using the measurement devices: multimeters, scopes, logic analizers and so on…;

In addition, I offering my personal organization capacity, dedication and tireless work ethic, hope should enable me to make a positive impact at the Corporation.

Enclosed is a copy of my resume for your review. I would welcome a personal interview at your earliest convenience to discuss your needs and objectives and the possibility of working together to meet them. Thank you for your time and consideration.

Sincerely,

David H Pereira

Enclosure

David H Pereira

Rua Itaocara, 523 – Duque de Caxias - RJ – Brasil. CEP – 25070-450

5521-26526437 davidhpereira@yahoo.com.br

Objective

To use my skill and technical acquaintance to act, in group or alone, as a flight simulator technician, efficiently.

Summary of Skills

Flight Simulator Skills

• Maintenance in Flight Simulator System. Hardware experience in TTL and CMOS technology by board repair in soldering after interpret system prints and schematics using knowledge in analog and digital theory. Software experience in analysis of assembler and machine language for R2000 computer, FORTRAN e C languages , MPX-32 (Operational system) e Sciclone (Organisation System) for GOULD Computer, 1980 -

• Maintenance in CHLORIDE No-Break Devices, 1988 -

• Maintenance in WICAT CBT SYSTEM,1990 –

• Maintenance in NT Millennium Flight Simulation System, 2002 –

• Maintenance in B707-300, B737-200, B737-300, B747-300, B767-300, DC10, ERJ145 Flight Decks, 1980 –

• Microsoft Offfice Suite ( Word, Excel, Power Point, Project, Outlook)

Telephone Exchange Skills

• Maintenance in Telephone Exchange PC1000B and PC1000C Systems, 1973 – 1975

• Test and maintenance in prototype devices at Laboratory Telephone Exchange, 1975 - 1977

Computer Skills

• Maintenance in Peripheral (Printers) of BURROUGHS B700 and B1700 Computer Systems, 1979 - 1980

Supervisory Skills

• Supervision at installation of National Telephone Communication Net Of Nigeria, 1977 - 1977

• Supervision at maintenance process in Varig Flight Training Electronics Devices Repair Office, 1990 -

Work History

Varig Flight Training Center – Rio de Janeiro – RJ – Brasil, 1980 - present

Head of Section, 1990-present

Flight Simulator Technician , 1980-1990

BURROUGHS Eletrτnica LTDA – Rio de Janeiro – RJ – Brasil,1979-1980

Trainee Electronic Technician C

PROMON Engenharia S.A. – Sγo Paulo – SP – Brasil, 1977 - 1978

Telephone Technician

STANDARD ELECTRICA S.A. - Rio de Janeiro – RJ – Brasil,1975-1977

Telephone Technician

COMPANHIA TELEFΤNICA BRASILEIRA S.A. - - Rio de Janeiro – RJ – Brasil,1973-1975

Telephone Technician

Education

UERJ – Universidade do Rio de Janeiro – Rio de Janeiro - Brasil

Bachelor of Pedagogy, 2002

CEFET – Centro Federal Tecnolσgico - Rio de Janeiro - Brasil

Electronic Technical Course (High School), 1972

General Courses

NT Millennium Simulator Maintenance Course in FlightSafety Center - Sant Louis - USA /2002;

Vital VIII Plus Image Generation / Skylight Systems in FlightSafety Center - Sant Louis - USA /2001;

CBT Course - Wicat Trainig Center - Provo - USA /1989;

REDIFFUSION 32-27 System Course in REDIFFUSION Training Center - Crawley - UK /1988;

REDIFFUSION R2000 System Course in VARIG Flight Training Center - Rio de Janeiro - Brazil 1980;

System B700 Printers Course – Burroughs Training Center - Sγo Paulo – SP – Brasil – 1979;

TANDEM Exchange Course – CTB Training Center - Rio de Janeiro – Brasil – 1974;

PC1000B System Course – CEFET- Rio de Janeiro – Brasil – 1972;

Reply #15 rachid Maarouf (41.250.37.241) -

Iam looking for job as an aircraft maintenance.

"option equipement bord

"esperience 15ans

Reply #16 Duane (64.91.50.180) -

A&P with Inspection Authorization

Seeking Overseas Aviation Maintenance Employment.

16 years Total Aviation Maintenance Experiance as Follows:

8 yrs US Military to include:

F-14, F18, plus Kaman SH-2G Super Seasprite & Blackhawk.

8 years US Civil to include:

Most SEL, & Light MEL, Flat Engine, Round Engine, Turbo Prop, 100 hr & Annual Insp, Sheet Metal, Painting, & Ground Up Restorations.

Prefer Long Term Employment but will consider Short Term.

Reply #17 UK International Airlines (172.214.38.102) -

We require Pilots ofr 767-200 and we require maintenance personnel overseas and in UK.

PLS SEND FULL CV'S

Reply #18 jidin jeevan (195.229.241.181) -

hi,

iam jidin jeevan.i compleated diploma in aircraft maintanance from southern collage of engineering tecnology, chalakkudy, kerala, india(approved by DGCA Govt of india).i have solid experience in B757-200 and B737-200 series aircraft from blue dart aviation ltd, chennai, india.if you give me chance to work with your estemed organisation ican prove my efficiency.

thanking you

jidin jeevan.c

Reply #19 Scott (66.167.9.77) -

*** A&P Mechanic Seeking Employment in Iraq / Overseas ***

--

- FAA Airframe & Powerplant; 8 years experience in General Aviation - most makes/models single/twin piston powered;

- factory trained on Teledyne Continental & Textron Lycoming piston engines

- extensive sheet metal fabrication & repair experience, restorations and interiors

- light turbine experience (King Airs, Learjets) progressive, phase inspections

- some regional jet experience (CRJs, ERJs)

- Private pilot SEL / Class III FAA Medical

- Have current passport / immunization documentation

- No criminal record - able to obtain Security Clearance if necessary

- will obtain IA immediately if necessary

- Ex-military, formerly stationed in Europe; lots of travel experience in Europe, North Africa

- Will send full resume upon request

Contact Scott ASAP at: skov@earthlink.net

Reply #20 Mike (24.110.11.8) -

I have 24 years exp in a major avionics design eng lab as a lab Tech.

Seeking overseas employment.

Reply #21 CAF Aviation (67.69.108.131) -

CAF Aviation requires Sheet Metal tech with Global Express. This is a 2 Years contarct

Reply #22 Jesus E. Herrera (199.82.243.71) -

I am interested in what kind of aircraft maintenace positions are opened in Iraq.

I have been an Avionics tech for 22 years.I have experience on the following aircraft: Boeing 727, 737, 747, 707 Douglass dc8, dc9, md80, dc10, md10, md11.Airbus a300b4, a310-200 a310-300, a300-600.Also have done some work on the c130 and the shorts360's.

I'm mostly experienced in avionics systems, electrical systems, aircraft systems.

I have worked for Pan American world airways, carnival Airlines, commodore aviation and presently work for fedex in memphis.

I would like to know what opennings there are in my field of experience.

Resume and reference wil be provided upon request.

JESSE

Reply #23 Gregory (196.201.151.5) -

Our company is looking for technician of A&P of B-727

Reply #24 john armijos (70.222.229.183) -

I LOKING FOR EMPLOYMENT OPPORTUNITIES IRAQ OR OVERSEAS I HAVE 20 YEARS EXPERINCE EN AVIATION AVIONICS A/P MECHANIC MY SKILLS IN HELICOPTER B206 B212 ROBINSON R22, R44 ALSO HEAVY B727, 737, 757, 767

AIRBUS A320, A310, A300, DC9, DC10, B747.CONTACT ME BY EMAIL.