'Seeking a Job in the UAE - Surgical/Medical Equipment Sales and Marketing' Resume

Seeking a Job in the UAE - Surgical/Medical Equipment Sales and Marketing

I thought of publishing an ad here, applying for a suitable job in the UAE, in the field of surgical and/or medical equipment (Sales: Sr. Product Specialist - Management: Sr. Supervisor, Franchise or Division Manager).

Unfortunatley I couldn't post my resume using this site, yet, it's ready to be sent upon request (e-mail is the best means).

Among expertise of other fields, my experience in the surgical/medical equipment field is:

* 2 years as a product specialist (technical sales) of Valleylab Equipment / Tyco Healthcare - Egypt.

* 1 year as a sales supervisor, same company and franchise.

* 1+ years as a division manager, same company and franchise.

Thank you for your time.

Regards,

Ahmed

Valleylab Division Manager

AB Care / Tyco Healthcare, Egypt

cell.: +2 012 24 25 27 2

home : +2 02 644 8934

ahmedfathi@yahoo.com

Business +962 7 9 5990010

House Phone: +962 6 5060209

E-mail: hammouri2002@http://hotmail.com

Eng. Mohammed H. Al-Hammouri

Personal Information � Date of Birth: 18/09/1980

� Nationality: Jordanian

� Gender/Status: Male/Single

Education

(2004-2005): Masters Degree in Business Administration (MBA):

� Earned from: New York Institute of Technology (NYIT)/ Jordan Branch

� Finished with a (Good) rating

(1998�2003): Bachelors Degree in Electronic Engineering Technology

Study Concentration : Biomedical Engineering:

� Earned from: Hijjawi College for Engineering Technology/Yarmouk University/Jordan

� Finished with a (Good) rating

(19 98): High School:

� Overall Jordanian High School Average: 91.7 % Scientific Stream.

Current Employment:

Sales and Service Engineer

(Apr 2004-�) Sales and Service Development Medical Supplies (DMS) Co. - Jordan

� DMS is a leading company in the field of medical supplies, supplying a lot of high caliber products from a wide range of prestigious vendors including 3M, Ethicon, Medtronic, HAWO, VP, Argowinngs, and many others. Tasks and accomplishments include:

� Sales and service engineer responsible for the 3M, HAWO, CONMED, VP, Argowinngs medical lines.

� Working profile includes � but not excluded to- the following devices and technologies: Sterilizers, Disposables, Assurance Products, Wrapping Materials, and others.

� Sales part of job description includes � but not excluded to- the following:

o Preparing and applying for government and private sector tenders.

o Following up with market customers for their day to day and long term requirements.

o Making new business relations with potential customers.

o Preparing markets studies.

� Service part of job description includes � but not excluded to- the following:

o Providing preventive and emergency maintenance to units currently deployed in the market place.

o Technical expertise focused in Ethylene Oxide sterilizers (ETO) Sealing machines, electro surgical units, patient monitors, defebulators, and others.

Working Experience Sales and Service Engineer

(Aug 2003 - Apr 2004) Sales and Service Munir Sukhtian Group Co. - Jordan

� Munir Sukhtian Group Co. is also a leading company in the field of medical supplies, tasks and accomplishments include:

� Sales and service engineer responsible for the TAYCO medical lines: (Kendal, Sherwood, Malendencot).

� Working profile includes � but not excluded to- the following devices and technologies: Respiratory, Anesthesia, Urology, O.R., Disposables and others.

Major Vendor Training � (Jan 2004)TYCO Company Official Medical Products Training (Technical and Sales):

� One week Training in Damascus � Syria for sales and service engineers.

� Training included TYCO�s respiratory line, anesthesia, and O.R. disposables.

� (May 2004) HAWO Company Official Medical Products Training:

� One week training in Hamburg - Germany for Service Engineers.

� Training included HAWO�s new generation of the sealing machines.

� (Aug 2004) 3M Company Official Sales Skills Training:

� Three day training in Beirut - Lebanon for sales engineers.

� Training material was focused on increasing product sales using modern sales and marketing practices.

� (Feb 2005) 3M Company Official Medical Product Training:

� One week training in D�sseldorf - Germany for sales and service engineers.

� Training focused on Ethylene Oxide sterilizers (ETO). It had two parts: Maintenances Training and Sales Training.

Technical Training:

Medical Supplies � (Aug 2002) to (Feb 2003):Arab Medical and Scientific Alliance

� Constructing and maintaining medical equipment, and training the hospital staff to work on them. Instrument profile included:

o Medication instruments such as Hemodialysis Machine, Anesthesia, Hematology Machine, Ultrasound Machine, and other medical equipment.

University Projects � Preliminary Project: Wireless Alarm Systems.

� Graduation Project: Pulse Oxi-Meter for measuring heart rate

Computer Knowledge Set � Windows Environment.

� Various Microsoft Office packages.

Language Skills � English: Very good in reading, writing, and conversation.

� Arabic: Native tongue.

Additional Professional Qualities � Attracting new customers and finding ways for maintaining current customer base.

� Performing market segmentation analysis.

� Advanced communication skills, in addition to being socially appealing.

� Keen engineering sense, especially in trouble shooting.

� Mature leadership persona.

� Advanced field marketing and sales skills.

References � Furnished upon request

i am a biomedical engineer i have graduated in 2004 and i some experiance in my work field hoping that i can find help from you sir

thank you sir for your time

H-22, South Extension,

Part I, New Delhi.

Johnson and Johson,

India.

Dear Sir/Madam,

Having recently graduated with a Masters of Biomedical Engineering from the University of New South Wales, I am very interested in gaining an opportunity to use the skills I have developed, in your industry. Your Corporation specialises in providing technical and regulatory consulting and training services, I am particularly interested in the area of Medical Equipments. However, I would be willing to gain experience in any area you feel is suited to my skills and experience.

I am particularly proud of my academic achievements, having gained good marks throughout my degree, especially given that I worked part time to support my studies. My most recent work experience was as an Instrumentation Engineer with International Metro Civil Contractors (IMCC) where I took responsibility for processing and installation of geotechnical instrumentation works for two sections which stretch for 2.5 kms with five people reporting to me. I also have gained experience in working and handling projects in various parts of India.

I have good understanding of International and Australian standards for safety, performance and quality control moreover I have good knowledge of safety standards, Mechanisms of approval, Acceptance testing procedures and Certification schemes for electro medical equipment. I also completed a Major Project for A Defibrillation Simulator using Java. I have also focussed on various medical image techniques used in clinical applications.

My research shows that your corporation encourages teamwork and although I am very comfortable working independently, I prefer to work with others. My excellent teamwork skills were developed both at university where assignments were completed in teams and also in my work as a member of the UNSW International Club where I was part of a team of six who organised various events. My responsibility was to raise the sponsorship funds and account to the university for expenditure.

Enclosed is a copy of my resume for your consideration. I would be very interested in meeting with you to discuss any possibilities and look forward to hearing from you. I am available on Ph: +91-9873014824, +91-9818076625 or via email: anubhavbaijal@yahoo.com.

Thank You,

Regards,

Anubhav Baijal

ANUBHAV BAIJAL

______

Address: H-22,South Extension,Part I,

New Delhi-110049

Phone: +91-9873014824,+91-9818076625,+91-11-24610285,+91-522-2332737

E-mail: anubhavbaijal@yahoo.com

CAREER OBJECTIVE:

To seek an opportunity for professional growth and increasing responsibility as professional in Biomedical Engineering field where team spirit, innovation, commitment and personal skills are recognized and rewarded.

PROFESSIONAL QUALIFICATIONS:

MASTERS IN BIOMEDICAL ENGINEERING 2004 - 2005

Graduate School of Biomedical Engineering.

University of New South Wales, Sydney, Australia.

Focus of the programme on:

 Biomedical Instrumentation: Studied Hardware and Software designs required to produce instruments for safety, performance and quality control.

Paper presented on Neural network based diagnostic interpretation of the clinical (12 lead) ECG.

 Medical Imaging: Focused on fundamentals of producing a medical image, image collection techniques in Nuclear Medicine and Positron Emission Tomography, Ultrasound, Diagnostic Radiology, Magnetic Resonance.

 Biomechanics of Physical Rehabilitation: Application of biomechanics principles to the areas of performance testing and assessment, physical therapy, design of rehabilitation equipment, design of internal and external prostheses and orthoses.

Visit to Appliance and LimbCenter, Redfern, Sydney.

Visit to Rehabilitation and Research Center, University of Sydney, Sydney

Aim:-Interacted with patients affected with Cerebral Palsy.

 Experimental Biomechanics: Experimental methods, instrumentation, optical measurement and data analysis methods in biomechanics. Undertook a series of experiments in the areas of quantitative gait and human movement, EMG, exercise testing and impact biomechanics.

Major Project Report: Standards for Cochlear Implants.

Minor Project: Variation in SAR for different mobile models and their after effect.

 Regulatory Requirements for Biomedical Technology

 Electromedical Standards

 Computing for Biomedical Engineers

 Clinical Laboratory Science

BACHELOR OF ENGINEERING - INDUSTRIAL ELECTRONICS

College: Priyadarshini College of Engineering and Architecture.

University: Nagpur University, Nagpur, India

Class: Ist Division

EMPLOYMENT:

1. Consultant –Instrumentation Feb 2004 - Jun 2004

IMCC (International Metro Civil Contractors), Connaught Place, New Delhi, India

(Joint Venture comprising of Dywidag, L&T, Samsung, IRCON and Shimizu)

203.200.104.67

Achievements:

Member of the team which successfully implemented Metro Rail System in New Delhi.

o Part of the team which was covering the stretch of around 2 km route between the New Delhi Station and Chawri Bazaar Sections, handling the installations and monitoring the instruments in this area.

 Layout plan for installation of Online Monitoring system

 Selection of vendor for procurement of instruments.

 Daily monitoring and maintenance of the system.

 Evaluation of data for further design modifications.

o Planning, Analysis, Installation and monitoring of Geo-Technical Instruments like inclinometers, strain gauge, load cell, pressure sensor, DAS system, Extensometer, Tilt meter/slope indicator, crack meter, standpipe and cassagrande in 6 stations and along tunnel route.

o Implementation and analysis of Online Data monitoring for strut forces.

o Handled the PMIS (Project Management Information System) through the local Internet and uploading of the data for client usage.

o Coordinated Sub Contractor responsible for Instrumentation and Monitoring

o Monthly presentation of results to the client.

2. Engineer- Instrumentation Apr 2002 - Dec 2003

Encardio Rite Electronics Pvt. Ltd., Lucknow, India www.encardio.com

Achievements:

o Research, Analysis and Presentation of Geotechnical Data. Installation.

o Monitoring of Instruments Inclinometers, Extensometers, Strain gauges, Piezometers, Crack-gauges & Tiltmeters.

o Quality Assurance.

 Testing of Peizo-Electric meters, Displacement Meters, Pore Pressure Meters, Calibration of Inclinometers and Load Cells.

 Conduct testing of all the instruments with hard work and dedication.

Projects Undertaken:

Teesta Dam Project (On River Teesta), Singtam, Sikkim, India. : July 2002

Achievements:

 Installation of Geotechnical Instruments like Pore Pressure Meter, Temperature Meter, Load Cells and Multi Point Bore hole Extensometers.

 Successfully completed the Installation of Extensometers on the crown of the tunnel which was the difficult part and was then given to handle the next project under my supervision.

Chamera Project (On River Chamera), Himachal Pradesh, India. August 2002

Achievements:

 Installation of arc weldable strain gauges.

 Led the installation successfully and thus designated to the prestigious Delhi Metro Project.

Delhi Metro Project (IMCC-A Joint Venture) Sept 2002 - Dec 2002

Achievements:

 Installation of Inclinometers, Strain gauges, Extensometers, Crack meters. Member of successful Installation and Monitoring team and was promoted to supervise one section of the Delhi Metro Rail.

3. Field Engineer Jul 2001 - March 2002

KallKwik Devices Pvt. Ltd.

Achievements:

o Installation of Routers, RF Tuners, Internet Leased Circuits, V-Sat.

COMPUTER AND TECHNICAL PROFICIENCY:

Diploma in Software Designing ER & DCI, Noida, Ministry of Information Technology, Govt. Of India

Languages : C/C++ Intermediate User

Operating System : Windows 98 /XP

Databases : Oracle (SQL-PL/SQL)

Development Tools : V.B (6.0)

EXTRA CURRICULAR ACTIVITIES

• Successfully organized IIPROM as a volunteer, 2000 Symposium on Mechatronics in Priyadarshini College of Engineering.

• Active Member of Electrotech Cultural Society in Priyadarshini Engineering College.

• Successfully led the role of Mentor (Volunteer) in International Student Services and assisted and guided new students in getting acclimatized with Australia and helped about 30 students to address their issues and concerns such as studies, accommodation.

REFEREES

1. Prof.Albert Avolio 2. Mr.Benno Pilz

Graduate School of Biomedical Eng Geotechnical Monitoring and

University of New South Wales Tunnel Surveying Engineer

Sydney, Australia 2052 GEODATA Ziviltechnikergesellschaft mbH

P: +61-2-9385-3924 Hauptniederlassung Leoben

Email: a.avolio@unsw.edu.au Hans-Kudlich-Straße 28

A-8700 Leoben, Austria.

P: +43-(0)3842-26 555-0

Email:b.pilz@geodata.at

FARHANG FARAHBOD

Golsar 147 St. No. 3. Sepid Buil.

4 Floor. Rasht. Guilan. Iran.

Postal Code: 41648-47341

Phone

+98 912 190 1682

+98 131 775 1750

+98 131 772 4977

FAX: +98 21 444 75062

Email: farhangfarahbod@yahoo.com

Education

Ph.D. Civil Structural Engineering, Isfahan

University of Technology, Isfahan, Iran.

Ph.D. Research Project:

Ductility Enhancement and Moment Redistribution Study

of Continuous Beam in reinforced Concrete Frames

Strengthened with CFRP Composite Sheets.

M.S. Civil Structural Engineering, Guilan University,

Rasht/Iran, May. 2000.

B.S. Civil Engineering, Guilan University,

Rasht/Iran, Sep. 1989.

Work Experiences

Superintendent Engineer, Aug 1998-Mar 2002.

Worked jointly with "Peyman Ghadir Consulting

Engineers CO." in execution of Central Building Tower

of Guilan Saderat Bank (located at Rasht/Iran).

Site Manager, May 1996-June 1998.

Worked with "Kotam Gostar Construction CO." in

execution of the tower No.5 of Education and Research

Federation of Iran National Oil CO. at Mahmood Abad

Mazandaran/ Iran.

Supervisor Engineer, Feb 1996-May 1996.

Worked jointly with "Tassam Consulting Engineers" in

execution of the Administration Building of Post and

Telecommunications Dept. of Iran Wood and Paper

Industries CO. (Chooka).

Supervisor Engineer, Apr. 1995-Feb. 1996.

Worked jointly with "Abode Investment CO." in

execution 230 units residential project of Lakanshahr

in Rasht/Iran.

Constructor Engineer, Aug 1992-Apr 1995.

Worked jointly with "Shengerf Construction CO." in

execution of Bandar-Abas/Iran Refinery (Iran National

Oil CO).

Constructor Engineer , July 1991-Aug 1992.

Worked Jointly with "Shengerf Constrution CO." in

execution of the project of Mosalla (Mosque) of Rasht

City (Iran) and also the site related to Sobhan

Pharmacy CO. ( Located at Rasht/Iran Industrial City).

Site Manager, Sep 1989-Feb 1989.

Worked jointly with "Pars Yekom Construction &

Industrial CO." in project of Khomam/Rasht

Telecommunications Administration and Exploitation

Building.

Graduate Courses Taken

Ph.D. Courses: Advanced Concrete Structures, Theory of

Stability, Advanced Mathematics, Theory of Plasticity,

Nonlinear finite Element Method, Advanced Concrete

Technology, Theory of Shells, Optimization Design.

M.S. Courses: Dynamic of Structures, Finite Element

Method, Engineering Mathematics, Advanced Steel

Structures, Theory of plates, Prestressed concrete.

Computer Skills

General: AutoCAD, Macromedia Flash MX, Word,

Excell.

Special: MATLAB, SAP 2000, STAAD, ANSYS.

Language

First official language: English.

Second official language: French.

Publication

1- Farahbod, F., "Postbuckling Analysis of

Quadrilateral Arbitrary Thin Plates Using Rayleigh

Ritz Method," International Conference on Civil

Engineering (ICCE), Isfahan University of

Technology/Iran, May. 2003.

2- Mostofinejad, D., and Farahbod, F., "Mechanical

Properties study of Structural Lightweight Concrete

Using Lightweight Materials in Iran and Silica-Fume,"

International Conference on Civil Engineering (ICCE),

Isfahan University of Technology/Iran, May. 2003.

3- Mostofinejad, D., and Farahbod, F., "Comparison of

Permissible Moment Redistribution of Continuous Beams

with ACI 318-02 and Iranian Concrete Codes," The 2nd

National Congress on Civil Engineering (2NCCE), Iran

Technical and Science University, May. 2005.

Regards

pradeep vijayan

1 year product spe. in EEG , EMG , URODYNAMIC (DANTED)

MY PHONE +2 0121623765

THANK U FOR YOUR TIME

Having a total experience of 10 Yrs in the Medical Eqipment Field.

dhivya

mail id: dhivya.ar@gmail.com

I got a MSc degree in biomedical engineering with high final score from a reputable university of IRAN.

I have 5 years of experience in technical and also marketing aspects of this filed, but now seeking a job in U.A.E.

my English is good and i also have some experiences in management fields related to medical equipment.

So, if there is any job vacancy in U.A.E related to my speciality, please inform me via my Email Address.

Regards,

Thanks

-Iam working in a pig company having alt of big names agency in medical equipment.

- I dont mind to change if i find a good jop that can show my skils

Mobile: +971-50-5708552

Am a grauate in b.sc allied health science(urology technologist)

well trained in urodynamics, ESWL, Asistin all open an endoscopic urological surgery, maintenance and sterilization techniques of various urological instruments including endoscopes, minor urological procedures, inpatient and outpatient care, oncall duties

I would like to work in clinical or sales/marketing field in UAE

I completed my Ms c Bio Medical instrumentation and have a work experience of two years as a Bio Medical Engineer.Now I am in Dubai, searching for a job in the same field.

my contact no:0509115890

Nw iam living in Sri Lanka and seeking for ajob in dubai . At the moment iam working as a product manager in medical trade company . iam hoping to find a job in the same field.

I AM SENIOR BIOMEDICAL ENGINEER WORKED IN GULF COUNTRIES FOR A PERIOD OF 13 PLUS YEARS OF EXPERIENCE SEEKING IN CHARGE IN BIOMEDICAL DEPARTMENT FOR HOSPITALS IN GULF

I HAVE ALSO

ANY EMPLOYER WISHES TO KNOW ABOUT MY SUITABILITY THEY ARE AT LIBERTY TO CONTACT ME.

REGARDS,

MR.KEERTHY

MY MOBILE:00914023530944.

SIR,

I AM SENIOR BIOMEDICAL ENGINEER WORKED IN GULF COUNTRIES FOR A PERIOD OF 13 PLUS YEARS OF EXPERIENCE SEEKING IN CHARGE IN BIOMEDICAL DEPARTMENT FOR HOSPITALS IN GULF

ANY EMPLOYER WISHES TO KNOW ABOUT MY SUITABILITY THEY ARE AT LIBERTY TO CONTACT ME.

REGARDS,

MR.KEERTHY

MY MOBILE:00914023530944.

Thank you.

I would like to seek a bio eng job at your place.I am a bachelor in Eng in Elx&communication.I have been working as a biomedical engineer in Manipal Hospital, pokhara, Nepal since past 3 years.I had done my basic training at manipal Hospital, banglore, india.I had already done training On GE instrument(ct/e, usg L-500, echo vivid, marquet TMT, x-ray), semines machines(MRI), fresinus medical care dialysis machine(4008-B, 4008-s), Hamilton Medical Ventillator(gallieo, XTC, G-5)etc.

Dear sir i am young and energetic moreover i would prove you as an asset of the organization if i get chance to join.

Thanks & regards

Ashis Parajuli.

You must a registered user and logged in to use this feature:

• Login
  (Register)

Share this with your friends on facebook, twitter and Google+

Tags help organize related posts and resources by topic.