'telco rigger ' Telecom Jobs

telco rigger

brian thompson (119.11.46.126) -

nine years in telco rigging, have much experience installing antennas and hoisting cables up towers at great heights worked on major rollouts in Sydney Onetel, Samsung, Hutchinson and telstra. worked on microwave links GSM 900/1800/2100, CDMA 800, WCDMA 850/2100 government radio network(GRN)and completed 3G network, I do all treminationson cables, have much experience in many telco fields of work a bit of techinical knowledge, been a team leader and supervised a rigging crew and contractors, wanting to work in dubai or middle east

Reply #1 Mir jamal khan (195.189.142.213) -

Hi sir, madam, this is mir jamal khan i'm living in pakistan my date of birth is 01-12-1977. My back ground is a high level of nokia flexi hopper metro hopper, nokia 2G, 3G bts mini link Rbs and siemens link 240xl bts installation i've 7years experience an telecom sector of green field nd rooftop sites complete installation.

Reply #2 Hafeez ullah (41.223.188.41) -

Hello dear,

i am hafeez ullah, i am living in pakistan but now i am wirking in congo with WARID telecom.my total experience in telecom is 07years.my back ground is with ARECSON Siemens and HUAWEI AND I have experience of erection tower Antenna installation RF cable 7/50 and 5/50 installations MW panning all kind and PAT all site experience earthing experience .I HOPE YOU WILL CONECT WITH ME

Reply #3 Ahmed bukhsh (41.223.188.41) -

AoA, HI

My name is Ahmed .I am Pakistani.My persnol job tower Erection,

MW link, RF antina, tower light, IF cable, RF cable layout,

My experance 6years.this time my job in Congo Brazaville.

Reply #4 Ahmed bukhsh (41.223.188.41) -

AoA, HI

My name is Ahmed .I am Pakistani.My persnol job tower Erection,

MW link, RF antina, tower light, IF cable, RF cable layout,

My experance 6years.this time my job in Congo Brazaville.

Reply #5 Hameed Naser (202.125.143.77) -

HI sir!

I am Telecom professional working in GSM from past 4 years, I got MS in Telecom and Bechlor in Computer Sciences degree and work experience is as follow:-

Internships with PTCL

Worked as system admin in Aviaphone ( broadband communication company )

Working on Soft Switch interfaces xipx1 & xipx2

Monitoring , diagnosing and trouble shooting various problems to the SS.

Was responsible for configuring ATA adaptors

Was responsible to control soft PBX named Asterisk.

worked as BSS engineer with Netkom ( huawei equipment for ufone Phase 5)

Commissioning the transmission equipment

Supervising the installation of transmission equipment

Testing own media and BSC media by looping and also checking connectivity of main and extension cabinet of BTS.

Supervising the installation of Microwave antenna NEC (Pasolink).

Resolving low power issues during the DRIVE TEST.

Supervising Team member to label different cable.

Coordination with Higher Authority regarding different issues.

Configuring DIP switches

worked as RPM in UCC ( Huawei equipment for Warid tel Phase 6.1, 6.2)

I Was responsible to handle all BSS and Microwave Transmission activities on Ufone Phase B and Warid Phase 6.1. ( Huawei Equipments )

currently working as Project manager with Stallion Technologies ( ZTE equipment for Telenor Phase 5)

I am responsible to handle all BSS activities on Telenor Sites in Upper and lower Dir (ZTE Equipments).

Right now I am interested to work in UAE , so kindly inform me if you get any vacancy related to my expertise.

Reply #6 Ahmed bukhsh (41.223.189.5) -

Hi

I am Ahmed bukhsh.this time my job in Congo Brazaville.tower Erection and all out door work. my experience 6year.I am telecom tower Rigger.

My work do RF cable IF cable install on the tower and micro way links RF antenna install on the tower. And I checked tower inspection, Galvanization, tower tightened, paint

Reply #7 Ahmed bukhsh (41.223.189.5) -

Hi

I am Ahmed bukhsh.this time my job in Congo Brazaville.tower Erection and all out door work. my experience 6year.I am telecom tower Rigger.

My work do RF cable IF cable install on the tower and micro way links RF antenna install on the tower. And I checked tower inspection, Galvanization, tower tightened, paint

Reply #8 TAHIR HUSSAIN (119.30.64.42) -

Slam,

i am tahir and work in netkom technologies as a bss site engineer. Responsible of Site commision azmith annta hight and bts installations. Instruments in used of Hauwei technologies.

Work in 3012, 3006 bts and 3702 wimax bts.

Reply #9 jahanzeb khan (58.27.148.21) -

sir i am jahanzeb khan. i am pakistani. i am keen pursue a career as telecom rigger with a dynamic organization providing incentives for professional growth by my 13 years experience in the telecom sector.. i have qatar driving license.and diploma in telecom..

Reply #10 philip Chia (66.178.87.136) -

I am a telcom rigger, have much experience installing antennas and hoisting cables up towers at great heights worked on major rollouts with diferent network GSM companies as a sub contractor. have much experience in many telco fields of work a bit of techinical knowledge, been a team leader and supervised a rigging crew and contractors, wanting to work in dubai or middle east

Reply #11 Javeed (124.29.218.99) -

Dear Sir,

My name is javeed i m woking with myson at huawie project i have good experience for installation of all kind RF and Microwave Anteenas and paining of all mirowave of dishes.i have good experience of out door work in GSM.

kind regards,

javeed

+923016772913

Reply #12 Abdur Rehman (124.29.226.63) -

Dear Sir,

My name is Abdur Rehman.Currently working in FSO(Field Service Organization)ericsson Pakistan.

My Job Title:Field Engineer as(BTS integrator and Transmission engineer)

Currently working for warid telecom and Zong Chaina Telecom in pakistan.

My current experience is 18 months in the following:

Implementation & Commissioning

• Responsible for implementation, commissioning and troubleshooting of RBS and Transmission equipments.

• Installation, Alignment, Integration and Commissioning of the Minilink Traffic Node, STM Node and

using Minilink Craft 3.3, Minilink TN, Minilink HC, Local Craft Terminal.

• Responsible for supervision of Installation of Indoor & Outdoor RBS cabinet, Transmission equipments and rectifier cabinet.

• Responsible for supervision of out door Installation and Microwave Link

• Installation and commissioning RBS 2116, 2106, 2107, Outdoor Cabinets.

• Installation and commissioning RBS 2216, 2206 and RBS 2207 Indoor RBS cabinets of Ericsson.

• Trouble shooting of RBS faults.

• Integration of sites using OMT software.

• Testing of VSWR by Site Master (S-331D).

• Responsible for Receiving Materiel accordingly to the SMR.

• Responsible for the Quality of the sites and PAT of Sites.

Transmission System

• Experience of Installation, Configuration, Troubleshooting and Rectification of IP Based Traffic Node (20P, 6P, 2P etc, )

• Experience in a configuration of MMU2, MMU2-B, MMU2-C, MMU2-E 155

• Experience in a configuration of NPU2, NPU1 B and NPU3

• Experience in Software up gradation (Modules and Baseline) of Traffic Node.

• Commissioning of Ericsson’s PDH and SDH Microwave Transmission Systems.

• Upgrading Radio links from 1+0 to 1+1 Hot / Standby and also Link capacity up gradation.

• Responsible for connectivity of two Base Stations via Microwave or VSAT.

• Traffic Routings and Channel Allocation according to Transmission MUX Plan.

• Experience in DCN Visibility of Mini Link through IP Addressing Scheme.

Verifying and Testing Tributary for E1 on ADM and BSC.

Swap (CMPAK Project)

• RBS swap from ZTE for CMPAK (ZONG Telecom) to Ericsson 2216 & 2116 as Supervisor and

Integrator. More than 40 sites in South Region Karachi

.

FOPS (Field Operation Services)

• Worked as Field Engineer CMPAK operation and Maintenance for the two month.

• E1 Routing from ADM site to Hub site and from Hub site to different sites.

• Configure MMU 2B, MMU 2C, MMU E155e, LTU 155e and upgrade NPU 1B,

2B using BFTP software.

• Troubleshooting Traffic Nod 20P, 6P, 2P using Mini-link Craft software.

• Transmission Swap From PTT to Wateen

Ericsson Training

• Training of RBS 2116, 2216 , 2308, 2111

• ME and Minilink craft

PREVIOUS EXPERIENCE

• Worked with Pakistan Telecommunication Limited (PTCL) as internee for two months. (From 05 May 2005 to July 2005). I have worked and studied DWDM, PDH.

• Worked with Mobilink GSM in Intelligent Network (IN) Department as internee for one month.

Responsibilities:

• Parameter changes for HLR and HLS numbers.

• Checked Location Updates for test sites.

• Was team member for the migration of IN.

• Daily health reports for IN equipments.

• Used Chris and IN platform.

• Testing for Ladies First package.

• Worked as internee in Apollo Telecom in voice and Data Department. Configure the

Switches and Routers and Studied in detail about Nortel Switches and Routers Data.

Reply #13 Khaled Deeb (212.34.2.206) -

To obtain a thriving position in a developing-pioneer company, where I can apply my Electrical and Telecommunication Engineering knowledge; to achieve Institutional and individual goals.

Education

CERTIFICATES PLACE OF ISSUANCE RATING DATE

B.Sc. of electric Engineering (majored in telecommunication field) The Hashemite University very good level grade (3.09 out of 4).

Feb 2008

General secondary education Jordan very good (89%) Aug 2003

Working Experiences:

• Batelco Jordan (1 Jan, 2008 To 30 July, 2008)

Sales department

Professional Training:

• Jordan Telecom Groups -Internet (10 Aug 2008 Till Now)

IP Engineer

• Teleprobe Center (4 May, 2008 To 1 July, 2008)

Prepared for CCNA

• Jordan Telecom Groups –Mobile (16 Sep, 2007 To 16 Nov, 2007)

GSM (Maintenance level 1)

Individual Skills:

1- Cisco Certified Network Associate (CCNA), Certified

2- Good knowledge of Programming Languages;(Assembly, C++, MatLab).

3- Good knowledge of engineering simulation software;(Multisim, AutoCAD, Circuit maker).

4- Work well when put under pressure, & Good presentation skills

5- Valid driving license and passport.

6- Good knowledge of computer packages ;( Microsoft Office and Internet

Related Courses:

Antenna and Wave Propagation, Digital Communication and Coding, Communication Networks, Digital Image Processing, Digital Filter Design, Communication Electronics, Electro Magnetic (1), Analog Communication System.

Graduated Project:

The project is ranked as one of the best graduation projects for senior students at the department of electric and computer engineering in the Hashemite University, Jordan.

Software Radio Design and Its Implementation The idea of this project was to implement the communication system using software in some stages to give flexibility

Language:

Arabic : mother language

English : very good reading , writing and speaking

References:

Available upon request.

Reply #14 Abdul Hakeem (203.104.27.62) -

Eleven years in telco rigging, have much experience installing antennas and hoisting cables up towers at great heights worked on major rollouts in MALDIVES worked on microwave links GSM 900/1800/2100, CDMA 800, WCDMA 850/2100 completed 2G 3G and tower erecting , I do all treminationson cables, have much experience in many telco fields of work a bit of techinical knowledge, been a team leader and supervised a rigging crew and contractors, wanting to work in dubai or middle east

Reply #15 Shahzad Anwar (58.27.156.198) -

Dear Sir,

My name is Shahzad Anwar.Currently working in Komkonsult telecom(Field Service Organization) Pakistan.

My Job Title:Field Supervisior as(BTS site installation and Transmission installation)

Currently working for warid telecom and Zong Chaina Telecom in pakistan.

My current experience is 3year in the following:

complete bts sites intallation and microwave alingment.

• Responsible for implementation, and troubleshooting of RBS and Transmission equipments.

• Installation, microwave Alignment,

• Responsible for supervision of Installation of Indoor & Outdoor RBS cabinet, Transmission equipments and rectifier cabinet.

• Responsible for supervision of out door Installation and Microwave Link

• Installation and commissioning RBS 2116, 2106, 2107, Outdoor Cabinets.

• Installation and commissioning RBS 2216, 2206 and RBS 2207 Indoor RBS cabinets of Ericsson.

• Trouble shooting of RBS faults.

• Testing of VSWR by Site Master (S-331D).

• Responsible for Receiving Materiel accordingly to the SMR.

• Responsible for the Quality of the sites and PAT of Sites.

Transmission System

• Experience of Installation, Configuration, Troubleshooting and Rectification of IP Based Traffic Node (20P, 6P, 2P etc,

• Upgrading Radio links from 1+0 to 1+1 Hot / Standby and also Link capacity up gradation.

• Responsible for connectivity of two Base Stations via Microwave.

Swap (CMPAK Project)

• RBS swap from ZTE for CMPAK (ZONG Telecom) to Ericsson 2216 & 2116 as Supervisor and

. More than 40 sites in South Region Karachi& Queet.

Ericsson Training

• Training of RBS 2116, 2216 , 2308, 2107, 2106

PREVIOUS EXPERIENCE

• Worked with Pakistan Telecommunication Limited (Prime telecom and komkonsult telecom pvt.)(From 12-07-2005 to 06-12-2006).(24-03-2007 to 15-12-2008)

• Worked with Mobilink GSM and AC mantinance 8 month prime telecom (pvt).

Reply #16 tariq (58.65.166.34) -

Muhammad Tariq Dear Sir,

Assalam u Alaikum. I have come to know that Techincal staff is required in your company. I am interested to join your company if chance is given to me. My resume is attached to this

E mail.

Hoping for good responce.

With regards

Muhammad Tariq Mehmood

Reply #17 tanveer ahmad (202.61.56.41) -

i apple to rf rigger to wirless

Reply #18 Md.Shamshul Arfin (202.140.130.160) -

Dear sir/Madam,

I am interested for the gulf and other region so i am sending my resume with this mail . Please go through it and let me know if i am a suitable candidate.

I am currently working in GTL Ltd. and posted in Dhaka (Bangladesh) from last 2.3yr.and i have +5yrs Experince in BSS & Transmission Engineer. I am waiting for your reply.

Thanks

Md.Shamshul Arfin

+91-9007006751

+8801713380144

Reply #19 tanveer ahmed (202.61.56.41) -

Reply tanveer ahmed qureshi

AoA, HI

My name is tanveer ahmed.I am Pakistani.My persnol job tower Erection,

MW link, RF antina, tower light, IF cable, RF cable layout,

My experance 3years.this time my job in Congo Brazaville

Reply #20 Asghar Ali Korai (65.49.14.12) -

Dear sir/Madam,

I am interested for the gulf and other region so i am sending my resume with this mail . Please go through it and let me know if i am a suitable candidate.

Work Experience BTS.

ƒζ Installation of Telecord BTS WLL independently.

ƒζ Installation of EVDO BTS, IP BTS expansion of WLL CDMA Project in ITR region.

ƒζ Installation of Rectifiers and Batteries for the BTS independently.

ƒζ Installation of ZXC10 of Alarm system (MISU) for the Temperature, humanity, smog, door and water sensors.

ƒζ Installation of runways for the PCM cables, RF cables, power cables and Battery cables.

ƒζ Installation of GPS Antenna and making the GPS connectors, RF jumper cable connectors, E1 connectors and RJ45 connectors.

ƒζ Installation of POMC Server system and Invertors.

ƒζ Installation of DDF and PCM cabling and media patching.

ƒζ Installation and commissioning of Microwave indoor and outdoor

ƒζ Troubleshooting power work, VSWR checking (RSSI) at BTS end.

ƒζ Discrepancy removal works etc.

ƒζ Troubleshooting and maintenance of Base transceiver station (BTS), Rectifier, Batteries, Air conditioners and Diesel generators.

ƒζ Installation of Outdoor Antenna, RF feeder cable, Ear thing Clumps.

ƒζ Have good Knowledge & experience in Driver test, Site Master and Scanner

Verified Antenna tilt, Azimuth and resolved Sector Swapping Issues for Drive test.

Work Exrerience Microwave

ƒζ Work experience of Installation and Configuration of ‘§NEC‘¨ Microwave Links. (For Mobilink, Telenor, U-Fone and PTCL (WLL)

ƒζ Now a days Supervising installations, Operations and Maintenance of NEC PDH MW (1+0) in PTCL CDMA WLL. Project

ƒζ Responsible for Microwave Media in ITR, NTR, RTR, HTR & FTR

ƒζ Coordination with Sub Contractor for installation of Microwave link.

ƒζ Regions. Experience of Installation, Configuration and Panning (Alignment) of ‘§NEC‘¨ Microwave Links.

ƒζ Installed PDH & SDH Microwave Links. (PASSOLINLK. 4E1, 16E1, 40E1).

ƒζ

ƒζ PAT for Mobil ink and PTCL (WLL) sites.

ƒζ Assembling, Panning (Alignment) and Bracing of 0.3m, 0.6m, 0.9m, 1.2m, 1.6m, 1.8m, 2.0m dishes.

ƒζ Proficient in using GPS, BERT Meter (Bit Error Rate Test), Multimeter, Compass used in Microwave Installation and General Navigation

I shall be very Thankfull to you.

Regards,

Asghar ali Korai

ZTE Pakistan

Reply #21 Asghar Ali Korai (65.49.2.10) -

Dear sir/Madam,

I am interested for the gulf and other region so i am sending my resume with this mail . Please go through it and let me know if i am a suitable candidate.

Work Experience BTS.

ƒζ Installation of Telecord BTS WLL independently.

ƒζ Installation of EVDO BTS, IP BTS expansion of WLL CDMA Project in ITR region.

ƒζ Installation of Rectifiers and Batteries for the BTS independently.

ƒζ Installation of ZXC10 of Alarm system (MISU) for the Temperature, humanity, smog, door and water sensors.

ƒζ Installation of runways for the PCM cables, RF cables, power cables and Battery cables.

ƒζ Installation of GPS Antenna and making the GPS connectors, RF jumper cable connectors, E1 connectors and RJ45 connectors.

ƒζ Installation of POMC Server system and Invertors.

ƒζ Installation of DDF and PCM cabling and media patching.

ƒζ Installation and commissioning of Microwave indoor and outdoor

ƒζ Troubleshooting power work, VSWR checking (RSSI) at BTS end.

ƒζ Discrepancy removal works etc.

ƒζ Troubleshooting and maintenance of Base transceiver station (BTS), Rectifier, Batteries, Air conditioners and Diesel generators.

ƒζ Installation of Outdoor Antenna, RF feeder cable, Ear thing Clumps.

ƒζ Have good Knowledge & experience in Driver test, Site Master and Scanner

Verified Antenna tilt, Azimuth and resolved Sector Swapping Issues for Drive test.

Work Exrerience Microwave

ƒζ Work experience of Installation and Configuration of ‘§NEC‘¨ Microwave Links. (For Mobilink, Telenor, U-Fone and PTCL (WLL)

ƒζ Now a days Supervising installations, Operations and Maintenance of NEC PDH MW (1+0) in PTCL CDMA WLL. Project

ƒζ Responsible for Microwave Media in ITR, NTR, RTR, HTR & FTR

ƒζ Coordination with Sub Contractor for installation of Microwave link.

ƒζ Regions. Experience of Installation, Configuration and Panning (Alignment) of ‘§NEC‘¨ Microwave Links.

ƒζ Installed PDH & SDH Microwave Links. (PASSOLINLK. 4E1, 16E1, 40E1).

ƒζ

ƒζ PAT for Mobil ink and PTCL (WLL) sites.

ƒζ Assembling, Panning (Alignment) and Bracing of 0.3m, 0.6m, 0.9m, 1.2m, 1.6m, 1.8m, 2.0m dishes.

ƒζ Proficient in using GPS, BERT Meter (Bit Error Rate Test), Multimeter, Compass used in Microwave Installation and General Navigation

I shall be very Thankfull to you.

Regards,

Asghar ali Korai

ZTE Pakistan

Reply #22 Marina from USA (Contact Member) -

TORONTO, CANADA - LOOKING FOR EXPERIENCED CELLULAR TOWER RIGGERS - Excellent compensation, benefits, relocation offered, VISA sponsorship

Requirements

Ψ Strong English skills, both written and spoken

Ψ Minimum 2 years experience in tower rigging and telecommunication tower maintenance

Ψ Experience in 3 ½ or 4G cellular antenna/equipment installation and fibre optic equipment and jumpers is an asset

Ψ Climbing/rescue certification and ability to climb heights of 350 feet

Ψ Experience with testing equipment such as In-line Dynometers and OTDR is an asset

Ψ Valid driver’s license

Ψ Willingness to travel to remote locations for periods up to 6 weeks and reside in camp accommodations occasionally

Duties

Ψ Assist in erection and removal of telecommunication poles, towers and associated support structures;

Ψ Remove, Install repair aerial telecommunication transmission and distribution antenna, equipment and associated hardware;

Ψ Remove, Install and repair various types and sizes of telecommunication cables and lines including fibre optic, coaxial, DC power;

Ψ Inspect and test transmission lines and cables and locate faults using instruments including but not limited to In-Line Dynometers and OTDR;

Ψ Analyze and record test results and prepare site acceptance documentation.

Only applicants with the above qualifications will be contacted. We offer competitive wages, overtime & benefits.

Submit a Word version of your resume along with a cover letter stating your qualifications to this opportunity. Also feel free to connect to me through LinkedIn for future opportunities.

Reply #23 Scott Phipps (149.254.56.8) -

Hi,

My name is Scott Phipps and I currently work as a Cellular Rigging Team Leader in the UK. I have vast experience in all types of cellular rigging. From tower building to rigging for telecomms equipment. I would love the opportunity to work abroad on a project as this is something I am yet to do. I would be able to bring my own team. A full CV can be provided upon request. I will look forward to hearing from you about this.

Cheers,

Scott

Reply #24 Aloke Banerjee (125.20.66.6) - 10/22/09 08:43

"Telecom RF Engineer"

I want a Telecom RF job in Canada with sponsor visa.Please help